采用滑模控制器提高稳定控制系统快速响应的研究

由于采用传统的稳定控制系统设计方法使得导弹弹体对不同大小指令信号响应的品质特性差异较大,因此主要研究了在传统的稳定控制系统设计方法的基础上,采用滑模变结构控制器来调节控制参数,较好地解决了稳定控制系统对大小指令信号时域响应特性差异较大的问题,提高了稳定控制系统的快速响应能力。     

船舶航向非线性系统离散变结构控制

基于非线性模型研究船舶航向自动舵的离散变结构控制设计问题。通过状态反馈精确线性化方法设计了二次型最优滑模面,采用离散趋近律方法求得变结构控制律。研究结果表明,所设计的离散变结构控制器能够快速准确地跟踪设定航向,并对参数摄动和外界风浪干扰具有很强的鲁棒性。     

Managing components for assemble‐to‐order products with lead‐time‐dependent pricing: The full‐shipment model

We study a component inventory planning problem in an assemble‐to‐order environment faced by many contract manufacturers in which both quick delivery and efficient management of component inventory are crucial for the manufacturers to achieve profitability in a highly competitive market. Extending a recent study in a similar problem setting by the same authors, we analyze an optimization model for determining the optimal component stocking decision for a contract manufacturer facing an uncertain future demand, where product price depends on the delivery times. In contrast to our earlier work, this paper considers the situation where the contract manufacturer needs to deliver the full order quantity in one single shipment. This delivery requirement is appropriate for many industries, such as the garment and toy industries, where the economies of scale in transportation is essential. We develop efficient solution procedures for solving this optimization problem. We use our model results to illustrate how the different model parameters affect the optimal solution. We also compare the results under this full‐shipment model with those from our earlier work that allows for multiple partial shipments. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

石英角速率传感器数字相关检测技术研究

为提高石英角速率传感器(QRS)的测量性能,提出了基于数字相关检测技术的QRS信号解调方案。该方案需将一组互相正交的参考信号作为两个相关器的输入,能够同时分离出QRS敏感信号相对于参考信号的同相分量和正交分量。通过角速度提取算法可由以上分量进一步得到输入角速度。分析了实现参考通道功能的两种方法:锁相环(PLL)和Hilbert变换,通过对这两种方法的对比得知,PLL更适合作为QRS相关检测的参考通道。     

甲板坐标系下速率火控射击诸元解算及弹道修正

速率火控系统是在甲板坐标系下解相遇的,它不依赖于导航系统.它与常规火控不同,甲板倾斜的修正不能采用简单的坐标系变换的方式.针对速率火控甲板倾斜修正问题,指出了两种需要进行甲板倾斜修正的情况,推导给出了计算方法,通过原理仿真计算,验证了计算方法的正确性.     

某雷达装备虚拟训练系统实现技术

从实际装备的特点出发,确定了虚拟训练系统的分布式实现模式.以该实现模式为基础,对系统软件结构框架、基于HLA/RTI的分布交互以及虚拟装备的人机交互等关键技术的实现进行了讨论,解决了雷达装备虚拟训练系统的系统集成环境构成、各仿真节点间的分布交互以及人机交互等问题,最后在虚拟训练系统上实现了雷达装备的开关机、跟踪以及故障维修等不同训练功能.     

基于实际案例的导弹装备战斗损伤评估

指出了基于实际案例的通用导弹装备战斗损伤评估内容及特点,提出了战斗损伤评估的量化标准,定义了战损率的概念;采用向量夹角余弦方法综合出了导弹装备各级组件的战损率及车辆的战损量化值,并通过实例证明了该方法具有所需信息量小、主客观综合性强、评估方法易于仿真实现等优点.     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

紧凑型电磁带隙结构短路销钉微带天线

提出一种带有短路销钉的紧凑型电磁带隙结构微带天线,并与相同尺寸的普通短路销钉微带天线作比较。测试结果表明,该电磁带隙结构天线在增益上增加了3dB,H面的交叉极化有了明显的改善。同时也证明了设计具有同样谐振频率的电磁带隙结构单元,使用这种紧凑型结构的单元尺寸仅为普通结构的40%~50%。这对最终实现电磁带隙结构微带相控阵天线具有重要意义。     

Emergency transshipment in decentralized dealer networks: When to send and accept transshipment requests

While there has been significant previous literature on inventory transshipment, most research has focused on the dealers' demand filling decision (when to fill transshipment requests from other dealers), ignoring the requesting decision (when to send transshipment requests to other dealers). In this paper we develop optimal inventory transshipment policies that incorporate both types of decisions. We consider a decentralized system in which the dealers are independent of the manufacturer and of each other. We first study a network consisting of a very large number of dealers. We prove that the optimal inventory and transshipment decisions for an individual dealer are controlled by threshold rationing and requesting levels. Then, in order to study the impact of transshipment among independent dealers in a smaller dealer network, we consider a decentralized two‐dealer network and use a game theoretic approach to characterize the equilibrium inventory strategies of the individual dealers. An extensive numerical study highlights the impact of the requesting decision on the dealers' equilibrium behavior in a decentralized setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006